• 歡迎光臨東莞市飛江電子科技有限公司官網!
    全國咨詢熱線

    13926563901

    18925580829

    飛江淘寶店鋪

    首頁>技術資料>51單片機

    LCD12864 液晶顯示器 模塊化程序(51單片機)

    發布時間:2018-03-26   瀏覽量:

     

     

     

    /**********************
    lcd12864.h 頭文件
    **********************/
    #ifndef _LCD12864_H_
    #define _LCD12864_H_
    extern void lcd12864_busy(); //忙標志函數
    extern void led12864_clear();//清屏
    extern void lcd12864_init(); //初始化函數
    extern void lcd12864_pxy(unsigned char p,unsigned char x,unsigned char y);//數據的顯示位置,p=0左半屏,p=1右半屏,p=2兩半屏全選,xy為顯示的坐標,第四象限,用正值表示。
    extern void lcd12864_zifu(unsigned char p,unsigned char x,unsigned char,unsigned char m); //第m個字符的顯示位置,與漢字的定義一樣,只是xy的坐標的值應小于等于7.
    extern void lcd12864_hanzi(unsigned char p,unsigned char x,unsigned char y,unsigned char m); //第m個漢字的顯示位置,p=0左半屏,p=1右半屏,p=2兩半屏全選,xy為顯示的坐標,第四象限,用正值表示,x或y的值都應小于等于3。m為顯示的第m個漢字。
    #endif

     

     

    /**********************
     lcd12864.c 文件
    **********************/

    #include
    #define uint unsigned int
    #define uchar unsigned char
    sbit cs2=P2^0;
    sbit cs1=P2^1;
    sbit e=P2^2;
    sbit rw=P2^3;
    sbit rs=P2^4;
    uchar code zifu[]=
    {
     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//,0
     0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  

     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//。1
     0x00,0x18,0x24,0x24,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

     0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//!2
     0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 
    };
    uchar code ziku[]=
    {
      //0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,//"你",
     //0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,

     0x80,0x84,0x44,0x44,0x24,0x14,0x04,0xFF,0x04,0x14,0x24,0x24,0x46,0xC4,0x40,0x00,//"李",0 漢字后面的數字表示漢字的代號,方便使用
        0x00,0x08,0x08,0x08,0x09,0x49,0x89,0x7D,0x0D,0x0B,0x09,0x08,0x0C,0x08,0x00,0x00,

     0x10,0x10,0x10,0xFF,0x90,0x50,0xFE,0x92,0x92,0x92,0x92,0x92,0x9A,0xD3,0x82,0x00,//"振",1 
        0x02,0x42,0x81,0x7F,0x40,0x30,0x0F,0x00,0xFF,0x40,0x07,0x18,0x28,0x64,0x22,0x00,

      0x80,0x40,0x20,0xF8,0x07,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x68,0x4C,0x08,0x00,//"偉",2
        0x00,0x00,0x00,0xFF,0x02,0x02,0x02,0x02,0x02,0xFF,0x02,0x12,0x22,0x1F,0x02,0x00,

     0x00,0x00,0x00,0xC0,0x70,0x20,0x00,0xFF,0x00,0x10,0x20,0xC0,0x80,0x00,0x00,0x00,//小3
     0x04,0x02,0x01,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x01,0x07,0x02,0x00,

     0x00,0x04,0x84,0x44,0x3C,0x44,0x85,0x06,0x04,0xC4,0x3C,0x44,0x84,0x04,0x00,0x00,//卒4
     0x04,0x05,0x04,0x04,0x04,0x04,0x05,0xFE,0x05,0x04,0x04,0x04,0x05,0x04,0x04,0x00,

     0x40,0x41,0xCE,0x04,0x00,0x80,0x40,0xBE,0x82,0x82,0x82,0xBE,0xC0,0x40,0x40,0x00,//設5
     0x00,0x00,0x7F,0x20,0x90,0x80,0x40,0x43,0x2C,0x10,0x10,0x2C,0x43,0xC0,0x40,0x00,

     0x20,0x21,0x2E,0xE4,0x00,0x00,0x20,0x20,0x20,0x20,0xFF,0x20,0x20,0x20,0x20,0x00,//計6
     0x00,0x00,0x00,0x7F,0x20,0x10,0x08,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,

     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//,7
     0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  

     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//。8
     0x00,0x18,0x24,0x24,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

     0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//!9
     0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
     
    };

    /*void delay(uchar i)   //1ms延時函數 
    {
        uchar a,b;
        for(b=i;b>0;b--)
            for(a=110;a>0;a--);
    }*/
    void lcd12864_busy()    //忙標志位函數
    {
     uchar i;
     rw=1;
     rs=0;
     while(1)
     {
      P0=0xff;
      e=1;
      //i=P0;
      e=0;
      i=P0;
      i=i&0x80;
      if(i!=0x80)
      break;
     }
    }
    lcd12864_writedat(uchar dat) //寫數據函數
    {
     //lcd12864_busy();
     rw=0;
     rs=1;
     e=1;
     P0=dat;
     e=0;
    }
    lcd12864_writecom(uchar com)  //寫命令函數
    {
     //lcd12864_busy();
     rw=0;
     rs=0;
     e=1;
     P0=com;
     e=0;
    }
    void lcd12864_init()   //初始化函數
    {
      lcd12864_writecom(0x3f);//開顯示 關顯示為0x3e
      lcd12864_writecom(0xb8);//設置頁地址為0.第一頁。
      lcd12864_writecom(0xc0);//設置顯示起始行地址,為第一行顯示到液晶屏上
      lcd12864_writecom(0x40);//設置列地址
    }
    lcd12864_pxy(uchar p,uchar x,uchar y) //數據的位置,p=0左半屏,p=1右半屏,p=2兩半屏全選,xy為顯示的坐標,第四象限,用正值表示。
    {
      switch(p)
     {
      case 0:cs1=0;cs2=1;break;
      case 1:cs1=1;cs2=0;break;
      case 2:cs1=0;cs2=0;break;
     }
      lcd12864_writecom(0xb8+y);
      lcd12864_writecom(0x40+x);
    }
    lcd12864_zifu(uchar p,uchar x,uchar y,uchar m) //第m個字符的顯示位置,與測字的定義一樣,只是xy的坐標的值應小于等于7.
    {
     uchar i;
     lcd12864_pxy(p,x*8,y);
     for(i=0;i<8;i++)
     {
      lcd12864_writedat(zifu[i+m*8]);
     }
    }
    lcd12864_hanzi(uchar p,uchar x,uchar y,uchar m) //第m個漢字的顯示位置,p=0左半屏,p=1右半屏,p=2兩半屏全選,xy為顯示的坐標,第四象限,用正值表示,x或y的值都應小于等于3。m為顯示的第m個漢字。
    {
     uchar i;
     lcd12864_pxy(p,x*16,2*y);
     for(i=0;i<16;i++)
     lcd12864_writedat(ziku[i+m*32]);
     lcd12864_pxy(p,x*16,2*y+1);
     for(i=0;i<16;i++)
     lcd12864_writedat(ziku[i+m*32+16]);
    }
    void lcd12864_clear()      //清屏函數
    {            
     uint i;
     lcd12864_pxy(2,0,0);      //清左右兩屏的第一、二、三、四頁
     for(i=0;i<256;i++)
     {
      lcd12864_writedat(0x00);
     }          
     lcd12864_pxy(2,0,4);      //清左右兩屏的第五、六、七、八頁
     for(i=0;i<256;i++)
     {
      lcd12864_writedat(0x00);
     }
    }

     

     

    /******************************************
     main.c 主文件
    ******************************************/

    #include
    #include"lcd12864.h"
    void main()
    {
     lcd12864_init();
     lcd12864_clear();
     lcd12864_hanzi(0,0,0,0);//李
     lcd12864_hanzi(0,1,0,1);//振
     lcd12864_hanzi(0,2,0,2);//偉
     lcd12864_hanzi(0,3,0,8);// 。
     lcd12864_hanzi(0,0,2,3);//小
     lcd12864_hanzi(0,1,2,4);//卒
     lcd12864_hanzi(0,2,2,5);//設
     lcd12864_hanzi(0,3,2,6);//計
     lcd12864_hanzi(1,0,2,9);//!
     lcd12864_zifu(1,6,6,8); //!的左上部 分開以字符的形式顯示
     lcd12864_zifu(1,7,6,9); //!的右上部
     lcd12864_zifu(1,6,7,10);//!的左下部
     lcd12864_zifu(1,7,7,11);//!的右下部
     while(1);
    }

    黑人粗大无码AV人妻一区